PetroCalcHubFree
Browse
Reservoir EngineeringPressure Transient Analysis

Dimensionless Shut-In Time for MDH Method Calculator

ΔtDA=0.0002637kΔtϕμctA\Delta t_{DA}=\frac{0.0002637k\Delta t}{\phi\mu c_tA}

Enter the required inputs, confirm the units, and run the calculator to solve Delta_t_DA. Review the formula source and assumptions before using the result in engineering work.

Tabular solver

Inputs

Defaults provide a quick field-unit example for the equation.

6 variables

Calculation runs locally with the shared TypeScript engine.

Formula reference

Dimensionless Shut-In Time for MDH Method calculates dimensionless shut-in time based on drainage area for pressure transient analysis workflows in reservoir engineering.

View formula, units, and source

Assumptions

  • Input values are representative for the well, reservoir, fluid, or equipment case being evaluated.
  • The declared units match the field-unit constants used in the formula.
  • The cited formula applies to the selected petroleum engineering workflow.

Common mistakes

  • Mixing unit systems without converting the inputs.
  • Using default example values as field recommendations.
  • Applying the formula outside the source assumptions.