{
  "version": 1,
  "topic": "PP04",
  "title": "Water resistivity temperature basis in a saturation workflow",
  "createdAt": "2026-10-24",
  "case": {
    "title": "Archie Water Saturation from Resistivity Logs",
    "premise": "Fixed controls: a = 1 dimensionless; phi = 0.2 fraction; m = 2 dimensionless; R_t = 20 ohm m; n = 2 dimensionless. R_w is varied as shown.",
    "formula": "S_w = ((a / phi^m) * (R_w / R_t))^(1 / n)",
    "variables": "a: Tortuosity Factor (dimensionless). phi: Porosity (fraction). m: Cementation Factor (dimensionless). R_w: Formation Water Resistivity (ohm m). R_t: True Formation Resistivity (ohm m). n: Saturation Exponent (dimensionless).",
    "steps": [
      {
        "label": "Define the baseline",
        "calculation": "Formation Water Resistivity (ohm m) = 0.05",
        "explanation": "Fixed controls: a = 1 dimensionless; phi = 0.2 fraction; m = 2 dimensionless; R_t = 20 ohm m; n = 2 dimensionless. R_w is varied as shown."
      },
      {
        "label": "Select the relation",
        "calculation": "S_w = ((a / phi^m) * (R_w / R_t))^(1 / n)",
        "explanation": "a: Tortuosity Factor (dimensionless). phi: Porosity (fraction). m: Cementation Factor (dimensionless). R_w: Formation Water Resistivity (ohm m). R_t: True Formation Resistivity (ohm m). n: Saturation Exponent (dimensionless)."
      },
      {
        "label": "Substitute the values",
        "calculation": "a = 1; phi = 0.2; m = 2; R_w = 0.05; R_t = 20; n = 2 → S_w = 0.25 fraction",
        "explanation": "Retain intermediate precision. The displayed values are rounded only after evaluation."
      },
      {
        "label": "Read the result",
        "calculation": "S_w (fraction) = 0.25",
        "explanation": "These are supplied formation-basis Rw values; no temperature correction is inferred."
      }
    ],
    "result": "S_w (fraction) = 0.25",
    "interpretation": "These are supplied formation-basis Rw values; no temperature correction is inferred.",
    "control": "Formation Water Resistivity (ohm m)",
    "columns": [
      "Formation Water Resistivity (ohm m)",
      "S_w (fraction)"
    ],
    "rows": [
      [
        0.025,
        0.17677669529663687
      ],
      [
        0.04,
        0.22360679774997896
      ],
      [
        0.05,
        0.24999999999999997
      ],
      [
        0.075,
        0.30618621784789724
      ],
      [
        0.1,
        0.35355339059327373
      ]
    ],
    "baseline": 2,
    "rowNotes": [
      "Formation Water Resistivity (ohm m) = 0.025. S_w (fraction): 0.176776695.",
      "Formation Water Resistivity (ohm m) = 0.04. S_w (fraction): 0.223606798.",
      "Formation Water Resistivity (ohm m) = 0.05. S_w (fraction): 0.25.",
      "Formation Water Resistivity (ohm m) = 0.075. S_w (fraction): 0.306186218.",
      "Formation Water Resistivity (ohm m) = 0.1. S_w (fraction): 0.353553391."
    ],
    "provenance": "Replayed with the same equation record and calculation engine as /calculators/archie-water-saturation-from-resistivity-logs. Original synthetic inputs; engine outputs are saved in the downloadable record.",
    "questions": [
      {
        "question": "Reproduce the baseline S_w (fraction) without rounding intermediate values.",
        "answer": "a = 1; phi = 0.2; m = 2; R_w = 0.05; R_t = 20; n = 2 → S_w = 0.25 fraction. S_w (fraction) = 0.25. These are supplied formation-basis Rw values; no temperature correction is inferred."
      },
      {
        "question": "Compare the first and last recorded scenarios. Which input changes?",
        "answer": "Formation Water Resistivity (ohm m) changes from 0.025 to 0.1. Other controls remain as stated in the premise. S_w (fraction) changes from 0.176776695 to 0.353553391."
      },
      {
        "question": "What would be needed to apply this example to a different physical system?",
        "answer": "Replace the synthetic controls with compatible documented inputs and check the relation's assumptions. a: Tortuosity Factor (dimensionless). phi: Porosity (fraction). m: Cementation Factor (dimensionless). R_w: Formation Water Resistivity (ohm m). R_t: True Formation Resistivity (ohm m). n: Saturation Exponent (dimensionless). These are supplied formation-basis Rw values; no temperature correction is inferred."
      }
    ]
  },
  "recorded": {
    "kind": "scalar",
    "equation": "archie-water-saturation-from-resistivity-logs",
    "parameter": "R_w",
    "inputs": {
      "a": "1",
      "phi": "0.2",
      "m": "2",
      "R_w": "0.05",
      "R_t": "20",
      "n": "2"
    },
    "values": [
      0.025,
      0.04,
      0.05,
      0.075,
      0.1
    ],
    "outputs": [
      {
        "expression": "((a / (phi^m)) * (R_w / R_t))^(1 / n)",
        "intermediates": {},
        "inputs": {
          "a": 1,
          "phi": 0.2,
          "m": 2,
          "R_w": 0.025,
          "R_t": 20,
          "n": 2
        },
        "target": "S_w",
        "unit": "fraction",
        "value": 0.17677669529663687
      },
      {
        "expression": "((a / (phi^m)) * (R_w / R_t))^(1 / n)",
        "intermediates": {},
        "inputs": {
          "a": 1,
          "phi": 0.2,
          "m": 2,
          "R_w": 0.04,
          "R_t": 20,
          "n": 2
        },
        "target": "S_w",
        "unit": "fraction",
        "value": 0.22360679774997896
      },
      {
        "expression": "((a / (phi^m)) * (R_w / R_t))^(1 / n)",
        "intermediates": {},
        "inputs": {
          "a": 1,
          "phi": 0.2,
          "m": 2,
          "R_w": 0.05,
          "R_t": 20,
          "n": 2
        },
        "target": "S_w",
        "unit": "fraction",
        "value": 0.24999999999999997
      },
      {
        "expression": "((a / (phi^m)) * (R_w / R_t))^(1 / n)",
        "intermediates": {},
        "inputs": {
          "a": 1,
          "phi": 0.2,
          "m": 2,
          "R_w": 0.075,
          "R_t": 20,
          "n": 2
        },
        "target": "S_w",
        "unit": "fraction",
        "value": 0.30618621784789724
      },
      {
        "expression": "((a / (phi^m)) * (R_w / R_t))^(1 / n)",
        "intermediates": {},
        "inputs": {
          "a": 1,
          "phi": 0.2,
          "m": 2,
          "R_w": 0.1,
          "R_t": 20,
          "n": 2
        },
        "target": "S_w",
        "unit": "fraction",
        "value": 0.35355339059327373
      }
    ]
  }
}